• Bean name - Bean name
• EEPROM - Internal on-chip EEPROM peripheral name
• Settings for Atmel AVR or Freescale HCS12 derivatives.
  • Interrupt service/event - Required Interrupt support: yes/no.
    If the interrupt support is disabled a pooling communication with EEPROM is used.
    • Interrupt - Interrupt vector name
    • Interrupt priority - Interrupt priority (if supported)
• Settings supported for Freescale HCS12 derivatives only.
  • EEPROM start address - Start address of the used internal EEPROM array.
  • Used size - Size of EEPROM array which is used by the bean (max size depends on the derivative).
• Page size - The size of the virtual page in bytes
• Settings for Atmel AVR or Freescale HCS12 derivatives.
  • Initialization - Initialization of the bean
    • Events enabled in init. - Events enabled in the initialization code
    • Wait enabled in init. - Wait enabled in initialization code (yes/no). If the Wait is enabled the driver always stays in the loop to the end of the operation.
      The Wait can also be selected by SetWait method at runtime.
• Settings for Freescale HCS12 derivatives.
  • CPU clock/speed selection - Settings for the CPU speed modes: identified whether the bean is supported or not.
    For details about speed modes please refer to page Speed Modes Support.
    • EEPROM clock - Input of the oscillator clock. The correct value is a frequency of 150kHz - 200kHz.
    • High speed mode - The bean is enabled/disabled in the high speed mode.
    • Low speed mode - The bean is enabled/disabled in the low speed mode.
    • Slow speed mode - The bean is enabled/disabled in the slow speed mode.