DAC
 
 
 Bean DAC
 
D/A converter

Parameters of the bean.

Properties:
  • Bean name - Name of the bean.
  • D/A converter - D/A converter device.
  • D/A channels - List of channels with pins used by the D/A converter. You may add/delete a channel item with the +/- buttons, and select a pin for each item with the roll-down menu.
    One item of the list looks like:
    Channel0 - Number of the channel.
  • D/A resolution - Maximum required data resolution of D/A converter

    There are 2 options:
    • 8 bits: 8 bits resolution
    • 12 bits: 12 bits resolution

  • Data mode - Select a data format of the D/A converter. This property determines the type of the SetValue method parameter.
  • Settings supported for HCS12 derivatives only.
    • Stop in wait mode - If this property is set to 'yes', the power of the device is allowed to be down in Wait mode and the power consumption of MCU is therefore reduced.
  • Initialization - Initial settings (after power-on or reset).



Processor ExpertTM and Embedded BeansTM are registered trademarks of UNIS, Ltd.
©1997-2005, UNIS, Ltd.